Comments on: The recovery disk does not work after the motherboard replacement

By: Thumber

Thumber — Thu, 14 May 2009 11:26:46 +0000

I have a satellite P205 S 6267 I did a low level reformat to the drive it took like 10 +hours then I reinstalled the OS from the recovery disk 1 and 2 the OS installed completely upon rebooting the message please wait while windows starts for the first time appears then it asks you to log on after log on a BLUE TOSHIBA screen appears and says “initailizing final installation” “do not interupt this process” Then the screen goes black! But the system lights remain on for the power HD Clock etc so it is not powering off its like going into sleep mode!and it stays this way until you do a hard restart which boots into safe mode, upon opting for a safe mode boot you get the following massage”Windows can complete installation in safe mode” Can you tell me what I need to do here? Why is the system going to sleep?
Thanks
Thumber Green

By: Badar

Badar — Thu, 08 Jan 2009 00:23:26 +0000

I have a Toshiba satellite M30-uu9. I have the recovery cds but when i run them through the correct path (reboot and f12 and select cd drive) it just says “wrong machine” in big “x” marks in dos-prompt. If i try to run it in windows it says that this recovery cd is for M30 not “portable pc” but I am using a M30. I dont know what to do? please help.

By: Sahil

Sahil — Mon, 03 Sep 2007 21:18:25 +0000

Hi… i have a fujitsu siemens laptop… the display screen is not displayed at all.. not even flickering… system boots.. the green lights show and also the DVD ROM boots… but there is nothing on the screen… also tried connecting to an external monitor but still there is no display… let me tell u the details… actually was trying to install windows and it installed only half way and rebooted.. then the system wouud not boot at all.. then removed the hard disk and it would enter into bios.. i put back the hard disk and it does not go to bios even… later somehow tried 3-4 times and it started booting with the hard disk also and was going into bios.. then suddenly there was no display on the screen.. and since then it is like that… i m not getting any display now… so can u tell me what the problem can be?? thanks a lot.. hope i have not taken much of ur time….