Display hinges for Toshiba Satellite L35 laptop
I am trying to find the left hinge ( or both ) for a Toshiba Satellite L35 series ( L35-S2194 ) I have tried to order them online and only got sent the right side. I am getting quite annoyed as you can imagine. Do you know where I can buy both hinges or the left. Website or company info is fine. I live in the US but will order outside of US if I have to. I have contacted every company I could find using the part number as my search and am not getting anywhere. I also called Toshiba a million times… Thanks a million if I can be helped!!
Toshiba Satellite L35 laptop comes with a 14.1″ or 15.4″ LCD screen and they use different hinges. You’ll have to find out which LCD screen is installed on your laptop.
You can search for new hinges on the Internet using Toshiba part number.
For laptops with 14.1″ LCD screen use the following part numbers: A000009390, A000009400, A000010000.
For laptops with 15.4″ LCD screen use the following part numbers: A000009360, A000009370, A000009380.
You can use either part number in each group, they are compatible.
Each set should include one right display hinge and one left display hinge.
Here’s what you should do:
1. Find out witch LCD screen is installed on your laptop.
2. Search for the part number and find the seller.
3. Contact the seller and make sure both display hinges are included.
4. Buy and replace hinges using laptop disassembly instructions.
Good luck!
November 22nd, 2008 at 7:40 am
Hi,
I have a Toshiba Tecra M2 whose screen is starting to come loose – I want to avoid it breaking completely.
I have checked the Toshiba Tecra M2 disassembly guide but am not sure at which stage I should fixe the hinges and also I am not sure how I would recognise that they are damaged.
Any advice would be gratefully appreciated.
November 26th, 2008 at 2:32 pm
Khublai Khan,
You cannot purchase hinges for a Tecra M2 laptop separately. Both hinges are a part of the back cover assembly (LCD cover assembly).
November 29th, 2008 at 3:37 pm
I have a Toshiba satellite L35. When I push the power button. The Toshiba screen pops up immediately and across the bottom it says, press F2 to enter setup or F12 to enter multi-boot selection menu but pressing either number does nothing. The fan is on, and three LCD green lights. I have tried a new memory module, and it does the same thing. I also have pulled out the hard drive and powered it up, the Toshiba screen is still there I would appreciate any help thanks
December 2nd, 2008 at 8:37 pm
Michael Vac,
Can you press F2 and enter the setup menu when the hard drive is removed?
February 23rd, 2009 at 12:39 pm
My sister has a Toshiba A3 which she managed to drop onto the floor and after that one of the display hinges snapped and is barly hanging on.
So I am curious if this is a thing I could dissemble myself and repair or if I need to send this into a service center.
December 17th, 2009 at 8:26 am
I have a Tecra M2 that the left hinge broke. I was able to drill out the rivet on the bracket that the hinge connects to and replace it with a small machine screw and nut. I found the nut and bolt at Radio Shack. It works good as new now.